China Professional Oil Rotary Vane Vacuum Pump for Vacuum Coating manufacturer

Product Description

Product Parameters

Model VRD-4 VRD-8 VRD-16 VRD-24 VRD-30 VRD-48 VRD-65 VRD-90
Pumping Speed 50HZ m3/h(L/S) 4(1.1) 8(2.2) 16(4.4) 24(6.6) 30(8.3) 48(13.3) 65(18) 85(23.6)
60HZ m3/h(L/S) 4.8(1.3 9.6(2.6) 19.2(5.2) 28.8(7.9) 36(9.9) 57.6(16) 78(21.6) 102(28.3)
Ultimate Partial Pressure Gas Ballast Close(Pa) 5×10-2 5×10-2 4×10-2 4×10-2 4×10-2 4×10-2 4×10-2 4×10-2
Ultimate Total Pressure Gas Ballast Close(Pa) 5×10-1 5×10-1 4×10-1 4×10-1 4×10-1 4×10-1 4×10-1 4×10-1
Ultimate Total Pressure Gas Ballast Open(Pa) 10 10 8×10-1 8×10-1 8×10-1 1.5 1.5 1.5
Power Supply Single/3 phase 3 phase
Power(kw) 0.4/0.37 0.4/0.37 0.55 0.75 1.1 1.5 2.2 3
Level of Protection IP44 IP44 IP44 IP44 IP44 IP44 IP44 IP44
Air Intake/Exhaust Port KF16/25 KF16/25 KF25 KF25/40 KF25/40 KF40 KF40 KF40
Oil Mass(L) 0.6-1.0 0.6-1.0 0.9-1.5 1.3-2.0 1.3-2.0 3.3-4.5 3.3-4.5 3.3-4.5
Motor Speed 50/60Hz(rpm) 1440/1720 1440/1720 1440/1720 1440/1720 1440/1720 1440/1720 1440/1720 1440/1720
Ambient Temperature(ºC) 10-40 10-40 10-40 10-40 10-40 10-40 10-40 10-40
Noise Level(dB) ≤52 ≤52 ≤58 ≤58 ≤58 ≤62 ≤62 ≤65
Weight(kg) 19 21 30 35 43 62 65 65
Size(L*W*H mm) 440*144*217 440*144*217 530*188*272 567*188*272 567*188*272 730*234*358 730*234*358 730*234*358

Product Description

“BOTH” VRD series pumps are designed for reliable long time continuous operation, they will take your equipment’s vacuum down to 0.3 CHINAMFG in minutes. Comes standard with all necessary fittings and a high capacity exhaust oil mist filter which also returns trapped pump oil back to the pump and makes the pump quieter to run. Multi-level gas ballast is designed to allow purposefully pull a less deep and slower vacuum by opening the gas ballast, allowing dry air to go directly into the pump and diluting the vacuum pull, and it also helps keep moisture, solvent, and other contaminants from getting stuck in the pump, and instead passing through to the exhaust. It is important to note that pumps should always be ran in a well ventilated area

· Tow-Shift adjustable gas ballast valve satisfies different requirements of condensable vapor(such as water vapor) to be exhausted
· Out of pump in different processes. Dual protection of oil anti-sucking back ensures vacuum system from oil pollution when pump
· Stops running and needs to be easily restarted. Forced oil circulation system consisted of oil pump and constant pressure oil supply mechanism ensures stable running of the pump.
· Less components are used, easy to maintain and repair

Application
· Rotary Vane Vacuum Pump corollary use with freezer dryer to reach vacuum state, it’s an essential corollary equipment in medicine CHINAMFG drying, biology, food industry and agricultural products deep processing
· Rotary Vane Vacuum Pump corollary use with vacuum drying oven for maintaining vacuum state inside the oven, they mainly applies in powder drying and baking in vacuum condition

Company Profile

Packaging & Shipping

FAQ

Q1. What is your products range?
• Industry water chiller, recirculating cooling chiller, rotary evaporator, alcohol recovery equipment, short path distillation kit, glass molecular distillation equipment, falling film evaporator, jacketed glass reactor and other lab equipment.

Q2. Are you trading company or manufacturer?
• We are professional manufacture of lab equipment and we have our own factory.

Q3. Do you provide samples? Is it free?

• Yes, we could offer the sample. Considering the high value of our products, the sample is not free, but we will give you our best price including shipping cost.

Q4. Do you have warranty?
• Yes, we offer 1 year warranty for the spare part.

Q5. How long is your delivery time?
• Generally it is within 7 working days after receiving the payment if the goods are in stock. Or it is 15 working days if thegoods are not in stock, depending on order quantity.

Q6. What is your terms of payment?
• Payment≤15,000USD, 100% in advance. Payment≥15,000USD, 70% T/T in advance, balance before shipment.
(If you are concerned about payment security for the first order, we advise you can place Trade Assurance Order via Alibaba. you will get 100% payment refund if we can’t meet agreed delivery time.)

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

After-sales Service: Online Service Support
Warranty: 2 Year
Oil or Not: Oil
Customization:
Available

|

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.







about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

rotary vane pump

How Does the Cost of Rotary Vane Pumps Compare to Other Types?

The cost of rotary vane pumps can vary depending on factors such as pump size, design, construction materials, manufacturer, and specific application requirements. Here’s a detailed explanation of how the cost of rotary vane pumps compares to other types:

– Initial Cost: In terms of initial purchase cost, rotary vane pumps are generally considered to be more affordable compared to certain high-end pump technologies such as centrifugal pumps or positive displacement pumps with specialized designs. Rotary vane pumps are available in a wide range of sizes and configurations, allowing for cost-effective options that suit various application needs.

– Maintenance and Operating Costs: When considering the total cost of ownership, including maintenance and operating expenses, rotary vane pumps typically offer advantages. These pumps are known for their simple design, which often translates into lower maintenance requirements and costs. They generally have fewer components and straightforward maintenance procedures, making them relatively easy to service and repair. Additionally, rotary vane pumps are often energy-efficient, contributing to lower operating costs over the pump’s lifespan.

– Efficiency and Energy Consumption: Rotary vane pumps generally have lower energy consumption compared to certain other pump types, such as older reciprocating pumps or some types of diaphragm pumps. The efficient design and operation of rotary vane pumps can result in reduced energy costs, especially when coupled with appropriate motor selection and control strategies.

– Longevity and Durability: Rotary vane pumps are known for their durability and longevity, which can contribute to cost savings over time. With proper maintenance, these pumps can provide reliable performance for extended periods, reducing the need for frequent replacements. The robust construction and use of high-quality materials in rotary vane pumps enhance their resistance to wear and tear, extending their operational lifespan.

– Application-Specific Costs: The suitability and cost-effectiveness of rotary vane pumps compared to other types can vary depending on the specific application requirements. While rotary vane pumps are versatile and widely used, there may be cases where other pump technologies, such as centrifugal pumps for high-flow applications or specialized positive displacement pumps for specific fluids, offer better performance or cost advantages. It’s essential to evaluate the specific needs of the application and consider factors such as flow rate, pressure requirements, chemical compatibility, and system efficiency when comparing costs.

It’s important to note that the cost comparison between rotary vane pumps and other pump types is not universal and can vary significantly based on factors mentioned earlier. Additionally, market conditions, availability, and specific manufacturer pricing policies can influence the cost differentials between pump types.

When selecting a pump, it is advisable to consult with pump manufacturers, distributors, or industry experts to assess the overall costs and benefits associated with different pump types. They can provide insights into the upfront costs, maintenance requirements, energy efficiency, and long-term value of various pump options, helping to determine the most cost-effective solution for a specific application.

In summary, while rotary vane pumps generally offer competitive initial costs, lower maintenance and operating expenses, and good durability, the cost comparison with other pump types depends on multiple factors and the specific application requirements.

rotary vane pump

How Does a Rotary Vane Pump Work?

A rotary vane pump is a type of positive displacement pump commonly used for creating vacuum or low-pressure environments. Here’s a detailed explanation of how a rotary vane pump works:

– Basic Principle: A rotary vane pump operates based on the principle of positive displacement. It uses a rotating mechanism with sliding vanes to create a continuous pumping action.

– Construction: A typical rotary vane pump consists of several key components:

– Rotor: The rotor is the central rotating element of the pump. It is typically offset from the center of the pump chamber and is connected to a drive mechanism, such as an electric motor.

– Vanes: The vanes are sliding elements that are inserted into radial slots in the rotor. They can be made of various materials, such as carbon, graphite, or synthetic materials, and are in constant contact with the pump chamber walls.

– Stator: The stator is the stationary part of the pump. It forms the pump chamber and is typically cylindrical in shape with an eccentric bore that accommodates the rotor.

– Inlet and Outlet Ports: The pump has separate inlet and outlet ports. The inlet allows the entry of gas or fluid into the pump, while the outlet facilitates the discharge of the pumped medium.

– Operation:

1. Starting Position: Initially, the rotor is positioned eccentrically within the stator, creating spaces, or cells, between the rotor vanes and the stator walls.

2. Intake Stroke: As the rotor rotates, one vane enters the intake port. This creates an expanding cell, leading to a decrease in pressure within the cell. This pressure drop causes gas or fluid to enter the pump through the inlet port and fill the expanding cell.

3. Compression Stroke: As the rotor continues to rotate, the vane moves along the stator wall, reducing the size of the cell. This compression action compresses the gas or fluid within the cell, increasing its pressure.

4. Discharge Stroke: The compressed gas or fluid is then pushed towards the outlet port as the vane moves further along the stator wall. This leads to the expulsion of the medium from the pump through the outlet port.

5. Repeat Process: The above steps are repeated continuously as the rotor continues to rotate, creating a continuous pumping action.

– Sealing and Lubrication: To ensure efficient operation and prevent leakage, rotary vane pumps require proper sealing and lubrication. The vanes slide against the stator walls, forming a seal to minimize backflow and leakage. Often, a small amount of oil or lubricant is introduced into the pump chamber to provide lubrication and maintain the seal between the vanes and the stator walls.

– Applications: Rotary vane pumps are commonly used in a variety of applications, including HVAC systems, vacuum packaging, laboratory equipment, automotive industry, and industrial processes that require vacuum or low-pressure conditions.

– It’s important to note that the performance of a rotary vane pump can be influenced by factors such as the speed of rotation, the number and dimensions of vanes, the quality of sealing, and the type of lubrication used.

In summary, a rotary vane pump operates based on the principle of positive displacement. It utilizes a rotating rotor with sliding vanes inside a stationary stator to create a continuous pumping action. The pump’s design allows for the intake, compression, and discharge of gas or fluid, making it suitable for various applications requiring vacuum or low-pressure environments.

China Professional Oil Rotary Vane Vacuum Pump for Vacuum Coating   manufacturer China Professional Oil Rotary Vane Vacuum Pump for Vacuum Coating   manufacturer
editor by CX 2024-02-28

Comments

Leave a Reply

Your email address will not be published. Required fields are marked *