China wholesaler Double Stage 2X-4, 2X-8, 2X-15, 2X-30, 2X-70 Sliding Vane Rotary Vacuum Pump vacuum pump oil near me

Product Description

2BV Liquid Ring Vacuum Pump

Product Name 2BV liquid ring vacuum pump/ circulating water ring vacuum pump 
Material SS304, SS316L, SS321, etc
Standard ISO,CE
Flow rate Up to 500m3/h
Voltage 220V/380V/415V/460V or as customer required
Warranty 12 months
Applilcation Pulp&paper industry:black liquid evaporation, vacuum dehydrator, degassing system of raw material and white water, suction tank, couch roll, absorption-shift roll and transmission roll, anti-wind box.
Chemical industry:Methane gas recovery, petroleum recycle, gas collection, exhaust compression, vapor collection, filtration and deceration, polyester production, PVC production.
Power plant:Condenser exhausting, water box priming, flue gas desulfurization, fly ash conveying, geother-mall gas removal, vacuum pressure impregnation for transformers.
Sugar industry:Sewage filtering, CO2 production etc.

2BV Liquid Ring Pump Introduction
2BV series liquid ring vacuum pump is suitable for suction gas and vapour, and the suction pressure can reach 33mbar(abs.) (i.e. 97% vacuum degree).

When the liquid ring vacuum pump works under the condition that the suction pressure is near the limited vacuum(saturated pressure of operating liquid) for a 
long time, it should couple with the cavitation protection pipe in order to protect the pump.

When it’s used as compressor, the maximum pressure is 0.26mpa(abs).

As a new generation of energy-saving product, 2BV series liquid ring vacuum pump will replace the SK and 2SK series liquid vaccum pumps and W,WY,WL series reciprocating vacuum pums completely with their superior performance and advantages.

2BV6 series liquid ring vaccum pumps and compressors are mainly used for pumping the explosive gas or working in the flammable and explosive environment.The technical parameter of each type is the same as the corresponding type of the 2BV2 and 2BV5 series product.

Advantage
1. The direct-coupled design is easy installation and can save space.
2. The pump has the cavitation protection port opens(or connects with the separator) in the case of ensure maximum suction effect to eliminate the noise of cavitation and protect the pump.
3. 2BV whole series are all use the aluminum bronze impeller with high strength and raise its corrosion resistance and durability. If the liquid flows parts adopt stainess steel, the pump can work in the more hard condition.

 

SPECIFICATIONS: 2BV Liquid Ring Vacuum Pump
Model Max.Suction
  capacity
  m3/h
Inlet&Out Feed water inlet Motor Power
KW(50HZ)
Pump
speed
rpm
Operating liquid
flow rate
L/min
Noise
dB(A)
Weight
kg
2BV2-060   27 G1” G3/8” 0.81 2840 2.5 62 31
2BV2-061 52 G1” G3/8” 1.45 2840 2.5 65 36
2BV2-070 80 G1.5” G3/8” 2.35 2860 3 66 56
2BV2-071 110 G1.5” G3/8” 3.85 2880 4.7 72 60
2BV5-110 165 DN50 G1/2” 4 1440 7.2 63 105
2BV5-111 230 DN50 G1/2” 5.5 1440 8.8 68 126
2BV5-121 280 DN65 G3/4” 7.5 1440 11 69 149
2BV5-131 400 DN65 G3/4” 11 1460 16 73 195
2BV5-161 500 DN80 G3/4” 15 970 22 74 320

If you have any others pump type require, please free contact us

FAQ

Q:Can you supply pump qualified with ANSI and ASME standard?
A:Yes, our pump compliant with ISO / ASME/ANSI standard.

Q:How to customize pumps and mechanical seals ?
A:Customers could send us application data, we will select suitable pump and seal types, or client could send us drawings, We are well in OEM and ODM.

Q:How can I pay for my items? What is the payment you can provide?
A:Usually by T/T, 30% down payment once PI confirmed, the balance will be paid after inspection and before shipment. TT or L/C at sight

Q:How long is warranty?
A:1 year for main construction warranty.

Q:How long is production lead time?
A:Normally 15 working days. If client need urgently, we have a huge spare parts stock, we could finish assembly and testing in 7 days.

Q:What is the shipping terms you can provide?
A:Depnends on customer’s requirements, we can provide different transportantin terms, such as EXW, FOB, CIF.

Q:Who is in charge of after-sales?
A:SUNPACE has professional after sales service team, we will follow up the client’s comments and suggest them good solutions. Solve client’s problems and keeping the clients profit.

Q:Who is in charge of maintenance?
A:Local agent. If pump running has any problem on site, our local agent will arrival the plant within 24 hours
 

Send message  Get product Offer & Brochure!!!
 ↓↓↓

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Warranty: 12 Months
Structure: Single-Stage Pump
Vacuum Degree: High Vacuum
Flow Rate Max: 500m3/H
Application: Vacuum Pumps for Chemical Applications
Power: Electric
Samples:
US$ 800/Set
1 Set(Min.Order)

|

Customization:
Available

|

Vacuum Pump

How to check the vacuum pump

A vacuum pump is a machine that draws gas molecules from a volume and maintains a partial vacuum. Its main job is to create a relative vacuum within the stated capabilities. If your vacuum pump isn’t working properly, it may need service. Read on to learn more about the types of vacuum pumps and how to check them.

Principle of industrial vacuum pump

Industrial vacuum pumps are used in industrial processes that require vacuum. These pumps are designed to generate, improve and maintain vacuum. Learn about the different types of industrial vacuum technology. You can start by reading about the most common types of industrial vacuum pumps. These pumps can be used in a variety of industrial processes from cleaning to manufacturing.
Regardless of the technology used to manufacture these pumps, the basic principles behind their operation are the same. The speed and mass flow of the pump will determine its capacity and suitability. A faster flow rate will minimize the time it takes for the machine to empty. Another important factor to consider is the type of vacuum you need.
A liquid ring vacuum pump is an industrial pump that uses a ring of liquid to form a seal. This type of pump is best suited for applications with high vapor loads and high liquid carry-over. Liquid ring vacuum pumps can be divided into two categories: liquid ring vacuum pumps and scroll vacuum pumps.
Industrial vacuum pumps work by removing gas molecules from a chamber. The partial vacuum created allows material to flow through the void. As more molecules are removed, the pressure in the chamber decreases, releasing energy that can be used for a variety of different purposes.
The most common use of industrial vacuum pumps is for electric lights. In these lamps, a vacuum pump removes the gas, causing the bulb to light up. Energy from the vacuum is also used in aircraft to power instruments. In addition to powering industrial vacuum cleaners, they are used in a variety of other environments.
High-performance industrial vacuum systems require specific materials that can withstand extreme pressure. This means that the materials used in these systems need to be properly checked. They must also be free of organic debris and other contaminants before they can be safely placed in the chamber.

Types of vacuum pumps

There are various types of vacuum pumps. Which one to choose should depend on the purpose of the pump and the degree of vacuum that must be achieved. It is mainly divided into three categories: rough vacuum or low vacuum, high vacuum and ultra-high vacuum. They all have varying degrees of scarcity. The higher the pressure, the fewer molecules per cubic centimeter. This in turn improves vacuum quality.
The vacuum pump is critical to the operation of the vacuum system. These devices are divided into three main categories according to their working pressure range. These pumps have different characteristics and technologies that make them ideal for specific applications. The choice of vacuum pump required for a particular application depends on how much vacuum you need, and how much power you are willing to spend.
Vacuum pumps are used in a variety of industrial and scientific processes. Their main function is to remove gas molecules from the sealed volume, leaving a partial vacuum. There are many different types of vacuum pumps, including rotary piston, liquid ring and scroll vacuum pumps. In addition, turbomolecular pumps are used.
Dry vacuum pumps are more expensive than wet vacuum pumps. Wet vacuum pumps use oil as their lubricating fluid. Different types of oils are used depending on the application. Some wet pumps have additional features, including contaminant filtration. However, wet systems have one major disadvantage: the contact between oil and fluid. To avoid this, oil separators are usually used.
There are several different types of vacuum pumps. The basic type is the positive displacement pump. It operates by expanding the chamber and removing gas molecules. The intake valve draws fluid into the chamber, while the exhaust valve opens when the chamber is at maximum expansion. This cycle repeats several times per second. Positive displacement pumps are often used in multistage vacuum systems.
Vacuum Pump

Maintenance of vacuum pump

Regular maintenance is very important to ensure the long-term effective use of the vacuum pump. One way to ensure proper pump performance is to change the oil regularly. Pump oil may be contaminated by vapor condensation. To avoid this problem, close the inlet valve for 20 to 30 minutes before applying vacuum. It is also important to install an inlet cold trap to protect the pump from corrosive vapors.
Another way to prolong the life of your vacuum pump is to periodically remove any solvent in it. This step reduces internal corrosion and prevents premature pump failure. During maintenance, be sure to disconnect the power supply to the vacuum pump. After cleaning, store it in a dry and safe place. The pump should also be disposed of in accordance with local regulations.
Vacuum pumps may require frequent oil changes, especially when used in wet chemistry. The standard rule is to change the oil after 3,000 hours of use, but some pumps require more frequent oil changes. It is also important to clean the oil regularly, as dirty or discolored oil can affect the performance of the pump.
Vacuum pumps are often equipped with on-site glass to allow the user to visually check the oil level. Clean oil will appear transparent, while dirty oil will appear darker. Frequent oil changes are essential, as oil changes can help spot various potential problems. Changes in vacuum pump performance or strange noises are also good indicators of a problem.
After an oil change, the vacuum pump should be cleaned thoroughly with a soft cloth and mild degreaser. Oil changes should take less than ten minutes, and they will extend the life of your equipment. Additionally, the outside of the pump should be wiped with a cloth or rag.
The pump must be properly vented to avoid internal corrosion. If possible, place the pump away from hot equipment or rooms. Overheating can reduce the viscosity of the oil and cause premature pump failure. In addition, it can lead to overwork of other expensive scientific equipment. Heat can also cause cracked rubber parts and oil leaks.
Vacuum Pump

Signs of damage to the vacuum pump

A bad vacuum pump can cause a variety of automotive problems, including poor fuel economy, difficult braking, undercarriage oil leaks, and faulty air conditioning. If any of these problems occur, call a mechanic to check your vehicle’s vacuum pump. You can also check the air conditioner and brake pedal to see if they are working properly.
A loud noise from the pump can also be a symptom of a malfunction. These noises are often caused by the aging and accumulated wear of specific components. If this is the case, the diaphragm, valve plate or seals may need to be replaced. However, if the noise is coming from bearings or other areas, more extensive repairs may be required. Additionally, dust and other contaminants can enter the pump chamber, which can degrade pump performance.
If the vacuum pump won’t start, it could be a blown fuse or a power or voltage problem. Other common causes are flow restrictions or improper installation at the entrance. Also, the vacuum pump may be damaged or the capacitors may be of poor quality. It’s not always easy to tell if a vacuum pump is leaking oil, but a greasy transmission can indicate a vacuum pump failure.
A leaking vacuum pump can also hiss when the car’s engine is running. If you hear it, check the hoses and connections to make sure there are no leaks. A vacuum leak may indicate a faulty vacuum pump, so you need to replace it as soon as possible.
Checking end pressure is easy, but a pressure gauge can also serve as a sign. You can also check for pump vibration by running a short procedure. Excessive vibration can be subtle, but it can greatly affect your process. If you notice excessive pump vibration, you should contact a professional immediately.
Poor pump performance can cause many problems for your company. A bad vacuum pump not only wastes material, it also damages your tools and reputation.

China wholesaler Double Stage 2X-4, 2X-8, 2X-15, 2X-30, 2X-70 Sliding Vane Rotary Vacuum Pump   vacuum pump oil near me		China wholesaler Double Stage 2X-4, 2X-8, 2X-15, 2X-30, 2X-70 Sliding Vane Rotary Vacuum Pump   vacuum pump oil near me
editor by CX 2024-03-26

Comments

Leave a Reply

Your email address will not be published. Required fields are marked *