The 14 sizes of conventional roller chains are available ranging from 25 to 240 including people in conformity with ANSI (American National Normal Institute), and ISO (International Organization for Standardization).
The chains not only meet the prerequisites to the minimum tensile power prescribed by ANSI and ISO, nevertheless they also provide the top rated class quality from the planet which includes a high fatigue strength
Ideal utilizes
?General use for driving and lifting tools.
Examples
?Driving transfer units and other tools. For multilevel parking.
Collection of chains
For collection of a chain, see the tables of “Max. Horsepower Ratings” for conventional roller chains and “Designing of Chain Transmission”. Having said that, only for a specific situation of very low velocity and significantly less shock, “Low-speed selection” approach could also be referred to.
Standard roller chains as much as 5 strands can be found. The common technique 
for connecting pins and TRANSFER CHAIN plates is rivet sort (RP).
The cotter sort (CP) is available for normal chains and HK chains of 80 or larger.
Sprockets
The standard roller chains can be engaged with typical sprockets of your corresponding nominal numbers. For sprockets, refer to your table of “Dimensions” for each size of chain.
Connecting hyperlinks and offset links
For connecting backlinks and offset links, refer to your table of “Dimensions” for every size of chain.
The connecting hyperlinks are normally R or C connecting links by which the pins are clearance-fitted with all the connecting plate. Due to the fact clearance-fitted links are inferior for the base chain in Max. allowable tension as during the case of one-pitch offset back links (OJ), “Low-speed selection” can’t be referred to. Since the Max. kilowatt ratings are decided thinking about the strength of connecting links and OJ, the clearance-fitted connecting backlinks and OJ may be employed when the chains are chosen in accordance to your “General selection”. When a increased Max. allowable stress is needed for that connecting link, make use of the interference-fitted connecting website link (H connecting website link) of the HI-PWR-S chain, and within the case of offset back links, use 2POJ.
