China Heavy Duty Sludge Dirty Water Pump Submersible 3 Phase Sewage Vacuum Pump manufacturer

Item Description

JUNTAI SEWAGE PUMP

 

A sewage pump is a pump used to get rid of drinking water that accumulates in a catch basin, generally identified in the basement of a property for secondary treatment of sewage If the basement is under the h2o table, h2o might enter the basin by means of the perimeter drains of the basement waterproofing method, or may movement in thanks to rain or organic groundwater. submersible sewage pumps are employed in areas in which basement flooding frequently occurs and to deal with moisture difficulties exactly where the water desk is earlier mentioned the basis of the home’s main wastewater treatment
 

SEWAGE PUMP Positive aspects

1. WQ/QW submersible pump sewage is created with itenational sophisticated technologies. It has been widely utilised in industrial, mining, design, clinic, municipal engineering, backyard garden, fountain, sewage therapy, chemical ,determine effluent,tertiary sewage treatment method , anaerobic wastewater remedy and other industries for more than 10 many years

 

two. The sewage pump submersible overcurrent elements are all made of sanes metal precision casting, which has the carateristis of no pllution and corosion rsistnce, and expands the software fields of h2o provide , aerobic wastewater remedy and drainage

 

three. The sewage water pump is created of ellent sainles metal 304/316 materials. It has pure texture and beatiul physical appearance, which reduces secondary pllution and fuly meets the needs of national geen environmental safety for primary sewage treatment method

 

four. The drainage sewage pump is enegficient, sensible in sructure, non-blocking and ani-winding, and has the charateristics of protected and trustworthy procedure and lengthy services life.The dual-rail automated coupling system is geared up as essential to failiate the inallatioan tertiary treatment method of sewage

 

5. The mechanical seal adopts double stop sealing substance, and employs higher-high quality hard aly this sort of as tungsten carbide,and runs in the oil chamber for a prolonged time, which Can make the stainless metal sewage water pump run repeatedly for more than ten,000 several hours for secondary sewage remedy

 

SEWAGE PUMP Creation Specifics

 

 

 

 

SEWAGE PUMP Generation PACKAGING

 

 

SEWAGE PUMP Manufacturing Areas

 

 

 

Creation PARAMETERS

 

SPECIFICATION

 

Product

Flow(m3/h)

Head(m)

Energy(KW)

Packing Measurement(cm)

Weight(KGS)

50WQ10-ten-.seventy five

10

ten

.75

60*twenty five*30

28

50WQ7-15-1.1

seven

15

one.1

sixty*twenty five*30

thirty

50WQ10-15-1.one

10

15

1.1

60*twenty five*thirty

thirty

25WQ5-22-1.1

five

22

1.1

60*twenty five*thirty

32

32WQ6-twenty-1.one

six

twenty

1.one

60*25*30

32

40WQ7-18-1.one

7

eighteen

one.one

sixty*25*thirty

31

50WQ10-12-1.1

ten

twelve

one.one

60*twenty five*30

32

65WQ15-9-1.1

fifteen

9

1.one

sixty*twenty five*30

34

50WQ10-12-1.1

10

12

one.1

sixty*twenty five*thirty

32

40WQ8-eighteen-1.five

8

eighteen

one.five

60*25*thirty

36

50WQ10-16-1.5

ten

sixteen

one.five

sixty*25*thirty

38

50WQ15-15-1.five

15

15

one.five

60*25*thirty

38

65WQ20-10-1.5

20

ten

one.5

60*25*thirty

forty

80WQ40-7-1.five

40

seven

1.five

60*25*30

forty two

100WQ50-5-1.five

fifty

5

one.five

sixty*twenty five*30

forty four

40WQ8-24-2.2

8

24

2.2

sixty three*25*30

38

50WQ9-22-2.2

nine

22

two.2

sixty three*25*thirty

forty three

50WQ15-twenty-2.two

fifteen

20

2.2

63*twenty five*thirty

43

65WQ20-fifteen-2.two

twenty

15

two.2

63*25*thirty

forty four

80WQ40-ten-2.2

forty

10

two.two

63*twenty five*thirty

45

100WQ50-7-2.2

50

7

two.2

sixty three*25*thirty

46

50WQ15-twenty five-3

fifteen

5

three

67*28*30

48

65WQ25-18-three

twenty five

24

3

sixty seven*28*thirty

50

65WQ37-13-three

37

22

3

sixty seven*28*30

fifty

80WQ45-12-3

forty five

20

three

sixty seven*28*30

52

80WQ43-13-three

43

fifteen

3

67*28*thirty

fifty two

100WQ60-9-3

sixty

10

three

sixty seven*28*thirty

54

50WQ15-thirty-four

fifteen

7

four

71*30*33

60

65WQ25-twenty five-4

25

25

four

seventy one*30*33

sixty two

80WQ40-16-four

40

eighteen

four

seventy one*30*33

sixty four

100WQ60-twelve-4

60

thirteen

four

71*thirty*33

sixty six

100WQ80-ten-four

80

12

4

71*thirty*33

66

1550WQ15-405.5

15

13

five.5

79*32*36

seventy eight

65WQ25-30-5.five

25

nine

5.5

seventy nine*32*36

80

80WQ40-22-5.5

forty

thirty

5.five

79*32*36

eighty two

100WQ60-18-5.5

sixty

twenty five

5.five

79*32*36

85

150WQ120-8-5.5

one hundred twenty

16

five.five

seventy nine*32*36

ninety five

50WQ15-50-7.5

fifteen

twelve

seven.five

86*34*38

103

65WQ25-forty-7.five

twenty five

10

seven.five

86*34*38

one zero five

80WQ40-28-7.5

40

40

seven.5

86*34*38

108

100WQ65-22-7.5

65

thirty

7.five

86*34*38

one hundred ten
150WQ120-ten-7.five one hundred twenty 22 seven.5 86*34*38 twelve

Appropriate USE OF Drinking water Amount SCHEMATIC

SEWAGE PUMP INSTLLATIONLLTION Guidelines

one.Verify whether or not pump fasteners are loosen and regardless of whether the pump entire body runner is blocked by international issues prior to installation to keep away from damage of impeller and pump entire body in operating wastewater sludge.

 

2.Supporters for the outlet pipe should be installed independently so that the bodyweight will not be extra to the pump so as to avert it from deformation. The pump base for each movable and fastened set up have to be leveled by a stage. After the base is completely ready, set up the pump on the base and then use a amount to examine horizontal and vertical predicament among the pump and motor shaft. Use the iron shim to alter the height of the foundation if the pump is out of level. Then grout the base and anchor bolt holes by pouring the concrete into the grout gap,minimize wastewater treatment method price.

 

three.Sewage remedy phases has levelness of the coupling gadget should be calibrated by a amount when coupling set up is adopted. Horizontal degree tolerance ought to not exceed .1mm/m. Use the measure gage to calibrate parallelism of 2 coupling rods to guarantee the parallelism tolerance will not exceed .2mm/m.

 

4.Tighten the anchor bolt to make sure there is no looseness in between the anchor bolt and concrete in situation of undesirable impact on sewage air pump efficiency when beginning.

 

5.For simple routine maintenance and protected use, set up a regulating valve on the outlet pipe and a strain gauge close to the outlet to guarantee the regular operation inside the rated overall performance variety, which lengthens the lifetime of sewage treatment method plant air pumps.

 

six.Rotate the impeller from the suction side right after installation. Disassemble the pump and discover out the causes if there is friction or stuck pump.

 

seven.The procedures of wastewater treatment plant in pump installation can be divided into 3 sorts, movable kind, set kind and coupling type
 

SEWAGE PUMP APPLIACATION

Broad Range OF Purposes AND Potent Functions:

 

one. Agricultural irrigation

 

two. River discharge

 

3. Engineering Discharge

 

4. Sewer drainage

 

5. Septic tank discharge

 

6. Basement drainage

Max.Head: 110m-150m
Driving Type: Motor
Material: Stainless Steel
Assembly: Liquid Pumps
Power: Electric
Start Up: Electric Pump

###

Customization:
Available

|

Customized Request

###

Model
Flow(m3/h)
Head(m)
Power(KW)
Packing Size(cm)
Weight(KGS)
50WQ10-10-0.75
10
10
0.75
60*25*30
28
50WQ7-15-1.1
7
15
1.1
60*25*30
30
50WQ10-15-1.1
10
15
1.1
60*25*30
30
25WQ5-22-1.1
5
22
1.1
60*25*30
32
32WQ6-20-1.1
6
20
1.1
60*25*30
32
40WQ7-18-1.1
7
18
1.1
60*25*30
31
50WQ10-12-1.1
10
12
1.1
60*25*30
32
65WQ15-9-1.1
15
9
1.1
60*25*30
34
50WQ10-12-1.1
10
12
1.1
60*25*30
32
40WQ8-18-1.5
8
18
1.5
60*25*30
36
50WQ10-16-1.5
10
16
1.5
60*25*30
38
50WQ15-15-1.5
15
15
1.5
60*25*30
38
65WQ20-10-1.5
20
10
1.5
60*25*30
40
80WQ40-7-1.5
40
7
1.5
60*25*30
42
100WQ50-5-1.5
50
5
1.5
60*25*30
44
40WQ8-24-2.2
8
24
2.2
63*25*30
38
50WQ9-22-2.2
9
22
2.2
63*25*30
43
50WQ15-20-2.2
15
20
2.2
63*25*30
43
65WQ20-15-2.2
20
15
2.2
63*25*30
44
80WQ40-10-2.2
40
10
2.2
63*25*30
45
100WQ50-7-2.2
50
7
2.2
63*25*30
46
50WQ15-25-3
15
5
3
67*28*30
48
65WQ25-18-3
25
24
3
67*28*30
50
65WQ37-13-3
37
22
3
67*28*30
50
80WQ45-12-3
45
20
3
67*28*30
52
80WQ43-13-3
43
15
3
67*28*30
52
100WQ60-9-3
60
10
3
67*28*30
54
50WQ15-30-4
15
7
4
71*30*33
60
65WQ25-25-4
25
25
4
71*30*33
62
80WQ40-16-4
40
18
4
71*30*33
64
100WQ60-12-4
60
13
4
71*30*33
66
100WQ80-10-4
80
12
4
71*30*33
66
1550WQ15-405.5
15
13
5.5
79*32*36
78
65WQ25-30-5.5
25
9
5.5
79*32*36
80
80WQ40-22-5.5
40
30
5.5
79*32*36
82
100WQ60-18-5.5
60
25
5.5
79*32*36
85
150WQ120-8-5.5
120
16
5.5
79*32*36
95
50WQ15-50-7.5
15
12
7.5
86*34*38
103
65WQ25-40-7.5
25
10
7.5
86*34*38
105
80WQ40-28-7.5
40
40
7.5
86*34*38
108
100WQ65-22-7.5
65
30
7.5
86*34*38
110
150WQ120-10-7.5 120 22 7.5 86*34*38 12
Max.Head: 110m-150m
Driving Type: Motor
Material: Stainless Steel
Assembly: Liquid Pumps
Power: Electric
Start Up: Electric Pump

###

Customization:
Available

|

Customized Request

###

Model
Flow(m3/h)
Head(m)
Power(KW)
Packing Size(cm)
Weight(KGS)
50WQ10-10-0.75
10
10
0.75
60*25*30
28
50WQ7-15-1.1
7
15
1.1
60*25*30
30
50WQ10-15-1.1
10
15
1.1
60*25*30
30
25WQ5-22-1.1
5
22
1.1
60*25*30
32
32WQ6-20-1.1
6
20
1.1
60*25*30
32
40WQ7-18-1.1
7
18
1.1
60*25*30
31
50WQ10-12-1.1
10
12
1.1
60*25*30
32
65WQ15-9-1.1
15
9
1.1
60*25*30
34
50WQ10-12-1.1
10
12
1.1
60*25*30
32
40WQ8-18-1.5
8
18
1.5
60*25*30
36
50WQ10-16-1.5
10
16
1.5
60*25*30
38
50WQ15-15-1.5
15
15
1.5
60*25*30
38
65WQ20-10-1.5
20
10
1.5
60*25*30
40
80WQ40-7-1.5
40
7
1.5
60*25*30
42
100WQ50-5-1.5
50
5
1.5
60*25*30
44
40WQ8-24-2.2
8
24
2.2
63*25*30
38
50WQ9-22-2.2
9
22
2.2
63*25*30
43
50WQ15-20-2.2
15
20
2.2
63*25*30
43
65WQ20-15-2.2
20
15
2.2
63*25*30
44
80WQ40-10-2.2
40
10
2.2
63*25*30
45
100WQ50-7-2.2
50
7
2.2
63*25*30
46
50WQ15-25-3
15
5
3
67*28*30
48
65WQ25-18-3
25
24
3
67*28*30
50
65WQ37-13-3
37
22
3
67*28*30
50
80WQ45-12-3
45
20
3
67*28*30
52
80WQ43-13-3
43
15
3
67*28*30
52
100WQ60-9-3
60
10
3
67*28*30
54
50WQ15-30-4
15
7
4
71*30*33
60
65WQ25-25-4
25
25
4
71*30*33
62
80WQ40-16-4
40
18
4
71*30*33
64
100WQ60-12-4
60
13
4
71*30*33
66
100WQ80-10-4
80
12
4
71*30*33
66
1550WQ15-405.5
15
13
5.5
79*32*36
78
65WQ25-30-5.5
25
9
5.5
79*32*36
80
80WQ40-22-5.5
40
30
5.5
79*32*36
82
100WQ60-18-5.5
60
25
5.5
79*32*36
85
150WQ120-8-5.5
120
16
5.5
79*32*36
95
50WQ15-50-7.5
15
12
7.5
86*34*38
103
65WQ25-40-7.5
25
10
7.5
86*34*38
105
80WQ40-28-7.5
40
40
7.5
86*34*38
108
100WQ65-22-7.5
65
30

<%

Write to us to find out more about our rotary vane pumps, and our team will get back to you as soon as possible!

As one of the leading rotary vane pump manufacturers, mechanical product suppliers, and factories, we supply rotary vane pumps and many other products. Find rotary vane pump manufacturers, suppliers, and exporters on rotaryvanepump.xyz.
The above information is only for knowledge sharing and product and manufacturer introduction for non-commercial purposes. All content is from the web. The article is our opinion. If there is any copyright infringement or find objectionable information, please contact me, and we will delete it immediately—address: 66 Poilus Street, Frankfurt, Germany. The use of original equipment manufacturer (OEM) part numbers or trademarks is for informational purposes only, describing product use and compatibility and replacing damaged original equipment parts. Our company and the replacement parts listed here are not sponsored, approved, or manufactured by an OEM.Editor by YJX.