Why Coupling Grease?
Ample lubrication is important for satisfactory gear coupling operation. Gear Coupling Grease is especially intended for gear coupling applications to improve coupling existence even though significantly lowering servicing time. Its high viscosity base oil and tackifier combine to maintain the grease in location and reduce separation and it’s in comprehensive compliance with NSI/AGMA 9001-B97 lubrication suggestions.
Coupling Grease is dark brown in shade and produced by using a lithium soap/polymer thickener, which has superior resistance to oil separation when subjected to substantial centrifugal forces commonly discovered in couplings. Bearing or standard purpose greases have a tendency to separate and shed effectiveness as a result of large centrifugal forces to the various ingredients at higher rotational speeds. These substantial centrifugal forces encountered in couplings separate the base oil in the thickeners. Heavy thickeners, which have no lubrication qualities, accumulate during the gear tooth mesh area resulting in premature coupling failure. Gear Coupling Grease is made to very resistant to centrifugal separation of the oil and thickener, which will allow the lubricant to get made use of for any somewhat extended time period of time.
Among the techniques for the results of Gear Coupling Grease is definitely the variable consistency through the entire doing work cycle from the application. The consistency of our gear coupling grease improvements using the operating conditions. Doing work from the lubricant under real service circumstances brings about the grease to come to be semi-fluid, functionally solash lubricating the dress in surfaces in the coupling. Since the grease cools, it returns for the authentic consistency, therefore stopping leakage.
Gear Coupling Grease is obtainable from stock in 14 oz. cartridges, one lb. and five lb. cans.
Attributes
Minimizing of coupling dress in
Resistance to water washing
Corrosion and rust safety
Substantial load carrying capabilities
Extended relubrication frequency
Use at temperatures up to 325° F
Staying in spot underneath higher speeds
Resistance to centrifugal separation
Reduction in down time & upkeep cost
Gear Coupling Grease has a consistency which overlaps the NLGI grades 0 and 1. This grease is specially formulated that has a lithium/polymer thickener and fortified with corrosion, oxidation, extreme pressure, and a effective rust inhibitor additive package.