Flexible plastic gear racks in 0.8 Mod (32DP) pitch. These racks can offer an easy to install rotational drive as high as approx 270 degrees for example on camera focus rings. They also provide an economical solution where a sizable gear is required or a longer stretch (up to 2 metres) of linear movement is desired. These racks are appropriate for our 0.8 Mod and 32 DP pitch Spur Gears.
EVER-POWER share racks are created for high precision linear movement applications. We offer a large selection of racks which range from module 0.5 to 10 and lengths from 100 to 2000 mm.
Hardened Surface Racks (MRGF – MRGFD) : Gets the highest strength and precision in the EVER-POWER regular rack series. Bolt holes could be remachined as carburizing is certainly applied only within the tooth region. J Series items are also available.
Hardened Ground Racks (KRGF-H – KRGFD-H) : High temperature treated floor gears with high precision and strength has excellent cost-overall performance ratio. J Series products are also available.
Hardened Racks (KRF-H/KRFD-H) : This is a strong rack made of Chromoly steel, treated by carburizing. Has high-power, high wear resistance, and enables downsizing of SR racks. J Series products are also available.
Hardened Racks (SRF-H/SRFD-H) : Stable Hardened racks with high strength, long life span are affordable. J Series products are also available.
Thermal Refined Ground Racks (KRG – KRGF – KRGD) : High strength and abrasion-resistant for precision linear motion.
Metal Racks w/ Machined Ends (SRAF – SRAFD – SRAFK) : This gear rack gets the same tooth elevation and face width sizes, smaller sized and reasonably priced compared to SRF Racks
Steel Racks (SR) : Low cost, large choices of modules and amount of tooth. J Series products are also available.
Steel Racks w/ Machined Ends (SRF) : Low priced, large selections of modules and amount of teeth. J Series products are also available.
Racks with Bolt Holes (SRFD – SRFK) : Low cost, large selections of modules and number of teeth. J Series items are also available.
Stainless Steel Racks (SUR•SURF•SURFD) : Suitable for food machinery due to SUS304 materials\’s rust-resistant quality.
Plastic-type Racks (DRF/DRFD/DRFK) : Plastic racks with little dimensional change, absorb lesser water than MC Nylon racks. J Series items are also available.
Plastic Racks (PR•PRF) : Produced form MC nylon, can be used without lubrication.
Brass Racks (BSR) : Small pitch racks manufactured from free-reducing brass, excellent workability and high rust resistance.
Steel Circular Racks (SRO – SROS) : Convenient in applications where the rack has the reciprocal motion. S Type is simple to install.
Stainless Steel Round Racks (SURO) : Same dimensions as SRO racks, except in stainless steel. Make use of where rust-resistance is required.
Ground Helical Racks (KRHG – KRHGF – KRHGFD) : Excellent items with high precision and power, and low sound and abrasion characteristics.
Metal Helical Racks (SRH – SRHF – SRHFD) : Effective in reducing noise and vibration because of larger get in touch with ratio of helical gears.
Molded Flexible Racks (DR) : Used in applications because of its flexibility, where metal racks do no have this attribute. Pinions and accessories are also available.
Molded Versatile Rack Clamps (SRS) : Utilized to secure Molded Versatile Racks.
Molded Versatile Rack Pinions (SSDR) : Spur pinions used for molded flexible racks.
Flexible Rack Guideline Rails (ARL) : Instruction Rails for Molder Versatile Racks.
You can expect as standard a wide range of Racks in Metric and Imperial sizes. Spur Racks can be found in Steel (En8) or more to 2 metres long. Stainless Steel and Delrin (Plastic-type) Racks are created with Spur and Helical tooth forms, square and circular sections up to 400mm in length. Alternative materials can be found on request. Moulded Hostaform Racks are available to offer a cost-effective alternative where less torque is required.
Variable stiffness can enhance the capability of human-robot interacting. Predicated on the mechanism of a versatile rack and equipment, a rotational joint actuator called vsaFGR is certainly proposed to modify the joint stiffness. The flexible gear rack could be regarded as a combination of a non-linear elastic element and a linear adjusting mechanism, providing advantages of compactness. The joint stiffness is certainly in the range of 217-3527 N.m/rad, and it is inversely proportional to the 4th-order of the apparatus displacement, and almost independent from the joint angular deflection, providing benefits of quick stiffness regulation in a short displacement of 20 mm. The apparatus displacement with respect to the flexible gear rack is definitely perpendicular to the joint loading pressure, so the power necessary for stiffness regulating is as low as 14.4 W, providing benefits of energy saving. The high compactness, great stiffness range and low power cost of vsaFGR are proved by simulations and experiments.
Flexible plastic equipment racks in 0.8 Mod (32DP) pitch. These racks can offer an easy to set up rotational drive of up to approx 270 degrees for instance on camera focus bands. They also offer an economical solution where a large gear is necessary or a longer stretch (up to 2 metres) of linear movement is preferred. These racks are compatible with our 0.8 Mod and 32 DP pitch Spur Gears.
EVER-POWER share racks are created for high precision linear motion applications. You can expect a large collection of racks ranging from module 0.5 to 10 and lengths from 100 to 2000 mm.
Hardened Ground Racks (MRGF – MRGFD) : Gets the highest strength and precision in the EVER-POWER regular rack series. Bolt holes could be remachined as carburizing is applied only within the tooth region. J Series products are also available.
Hardened Floor Racks (KRGF-H – KRGFD-H) : Heat treated floor gears with high precision and power has excellent cost-overall performance ratio. J Series items are also available.
Hardened Racks (KRF-H/KRFD-H) : This is a solid rack made of Chromoly steel, treated simply by carburizing. Has high-strength, high wear resistance, and enables downsizing of SR racks. J Series products are also available.
Hardened Racks (SRF-H/SRFD-H) : Stable Hardened racks with high power, extended life span are reasonably priced. J Series products are also available.
Thermal Refined Ground Racks (KRG – KRGF – KRGD) : High strength and abrasion-resistant for precision linear motion.
Steel Racks w/ Machined Ends (SRAF – SRAFD – SRAFK) : This gear rack gets the same tooth elevation and encounter width sizes, more compact and reasonably priced in comparison to SRF Racks
Steel Racks (SR) : Low cost, large selections of modules and quantity of the teeth. J Series items are also available.
Steel Racks w/ Machined Ends (SRF) : Low cost, large selections of modules and number of teeth. J Series items are also available.
Racks with Bolt Holes (SRFD – SRFK) : Low priced, large selections of modules and quantity of the teeth. J Series items are also available.
Stainless Steel Racks (SUR•SURF•SURFD) : Suitable for food machinery due to SUS304 materials\’s rust-resistant quality.
Plastic material Racks (DRF/DRFD/DRFK) : Plastic racks with small dimensional change, absorb lower water than MC Nylon racks. J Series items are also available.
Plastic Racks (PR•PRF) : Produced form MC nylon, can be used without lubrication.
Brass Racks (BSR) : Small pitch racks made of free-trimming brass, excellent workability and high rust resistance.
Steel Round Racks (SRO – SROS) : Convenient in applications where the rack has the reciprocal movement. S Type is simple to install.
Stainless Steel Round Racks (SURO) : Same dimensions as SRO racks, except in stainless. Make use of where rust-resistance is required.
Surface Helical Racks (KRHG – KRHGF – KRHGFD) : Excellent products with high precision and power, and low noise and abrasion characteristics.
Steel Helical Racks (SRH – SRHF – SRHFD) : Effective in reducing noise and vibration due to larger contact ratio of helical gears.
Molded Versatile Racks (DR) : Used in applications due to its flexibility, where steel racks do no have this attribute. Pinions and 
add-ons are also available.
Molded Versatile Rack Clamps (SRS) : Utilized to secure Molded Versatile Racks.
Molded Flexible Rack Pinions (SSDR) : Spur pinions used for molded versatile racks.
Flexible Rack Information Rails (ARL) : Instruction Rails for Molder Flexible Racks.
You can expect as standard an array of Racks in Metric and Imperial sizes. Spur Racks can be found in Steel (En8) and up to 2 metres long. STAINLESS and Delrin (Plastic) Racks are created with Spur and Helical tooth forms, square and round sections up to 400mm in length. Alternative materials are available on ask for. Moulded Hostaform Racks are available to offer an economical alternative where less torque is required.
Variable stiffness can improve the capacity for human-robot interacting. Based on the mechanism of a flexible rack and gear, a rotational joint actuator named vsaFGR is usually proposed to modify the joint stiffness. The flexible gear rack could be regarded as a mixture of a nonlinear elastic element and a linear adjusting system, providing advantages of compactness. The joint stiffness is usually in the number of 217-3527 N.m/rad, in fact it is inversely proportional to the 4th-order of the gear displacement, and nearly independent from the joint angular deflection, providing advantages of quick stiffness regulation in a short displacement of 20 mm. The apparatus displacement with respect to the flexible gear rack is perpendicular to the joint loading pressure, so the power required for stiffness regulating is as low as 14.4 W, providing advantages of energy saving. The high compactness, great stiffness range and low power cost of vsaFGR are proved by simulations and experiments.
