The EP Greenhouse gearbox is a compact and lightweight reduction geared motor with a limit switch system that’s ideal for assembly of a locally available electric engine. The geared motor is used in manually-managed or climate-managed ventilation and screen systems in greenhouses. The quick and easy-to-install EP gear motor is certainly rainproof and windproof. The gear motor has a high protection course (IP65) and can be used within an ambient temperature of 0-60 °C.
The low-noise geared motor for Greenhouse has a gearwheel transmission and a worm wheel transmission, which are integrated in an aluminum precision housing. The self-braking worm wheel transmission means that the drive shaft can be locked when the decrease gear reducer isn’t running. The completely sealed reduction geared motor has an expansion chamber with a diaphragm to keep the gear oil at a minimal pressure under all conditions, even at high temps. Thanks to the use of an expansion chamber, the gearbox could be installed in any position. There are no restrictions, because there is no dependence on a bleed plug. The sealed reduction reducer keeps the apparatus oil of the gearbox in ideal condition for its entire operating life time. The geared motor is ideal for discontinuous use, working class s3-30%, with a maximum activation period of 25 minutes.
The Gear box reduction geared motor has an FT85 motor assembly flange, on to which a suitable IEC standard motor can simply be installed (EN 50347).
The Gear box has a rotating limit switch system with operating switches and circuit breakers (NC contacts) for turning off at the end positions. The limit change system is installed in an included chamber and is certainly enclosed by an impact-resistant plastic material cover. The limit switch system is accessible and simple to adjust. The limit switch system’s optimum switching range is definitely 40 or 64 revolutions of the drive shaft. The cabling is linked in spring-clip connections. The gear motor has an IP68 M16 x 1.5 cable gland (5-9 mm cable) for the cable feed-through.
The reducer for greenhouse includes 16 teeth 5/8”x3/8” sprockets, keys and fasteners. The accompanying chain couplings and assembly plates can be found as accessories.
Maximum drive torque of 150 Nm or 450 Nm.
Rotational speeds of 3 or 5 rpm for a mains frequency of 50 Hz or 3.6 or 6 rpm for a mains frequency of 60 Hz in case of application of 4-pole electric motor.
Protection class IP65.
Can be used in ambient temperatures of 0-60°C.
Ideal for discontinuous use, operating class s3-30%, maximum activation time 25 minutes.
Equipped as regular with 16-tooth galvanised chain coupling 5/8″x3/8″.
FT85 motor assembly flange for installation of IEC standard motor (EN 50347).
Maximum switching range of limit switch system 40 or 64 revolutions of the drive shaft.
IP68 M16x1.5 cable gland for cable feedthrough (5-9 mm cable).