This standard range of Servo-Worm Reducers are perfect for use in applications that demand high performance, precise positioning and repeatability. They were specifically developed for use with state-of-the-art servo electric motor technology, providing tight integration of the engine to the unit. Angular backlash of significantly less than 1 arc-mins is provided standard.

They can be purchased in four sizes (50 mm to 100 mm center range) with input boosts to 5,000 rpm, reduction ratios from 4.75 to 52:1 and output torque capacities up to 885 lb.ft. A wide variety of electric motor couplings and installation flanges are available for assembly to practically all servo motors, and the hollow bore result can be utilized to mount result shafts, pinion shafts, or other drive elements.

Typical applications for these reducers include precision rotary axis drives, traveling gantries & columns, materials handling axis drives, zero-backlash axis drives and digital line shafting. Industries served include Material Handling, Automation, Aerospace, Machine Tool and Robotics.
helical-worm servo gearmotors have a torque range of 92 Nm to 520 Nm. As angular drives they are especially space-saving and reduce the expenditure for valuable set up space.

The helical-worm servo gearmotors were created so that they guarantee you a low-noise system environment. Moreover, these gearmotors offer you superb attenuation properties for the procedure of your systems with low levels of vibration. This is usually because of the longitudinal program of power on the insight shaft. This enables torque impulses to be prevented efficiently and for optimum results in conditions of running smoothness and sound reduction to be performed.

Both the equipment unit, and the synchronous servomotor are based on our low backlash worm drive modular system. This enables you to have fully individual configuration options for every application. One matter is for certain – Our servo gearmotors are actual specialists for very specific requirements.
Wormwheel gearboxes pass several names, including 90-degree gearboxes, right position gearboxes, acceleration reducers, worm gear reducers and worm drive gearboxes. Gear reduction boxes feature a gear arrangement in which a equipment in the kind of a screw, also called a worm, meshes with a worm gear. These gears are typically made from bronze and the worms are steel or stainless steel.

While worm gears are similar to a spur equipment, the worm gearboxes are considerably smaller than other equipment reduction boxes. A main benefit of worm equipment reducers can be that they produce an output that is 90° from the input and can be utilized to transmit higher torque or reduce rotational speed. Most often, a worm gearbox offers right hand threads; to change the direction of the result, a left-hand thread worm gearbox is required.
At times a motor’s capability may be limited to the stage where it requires gearing. As servo manufacturers develop better motors that can muscle tissue applications through more complicated moves and create higher torques and speeds, these motors need gearheads equal to the task.