Material Managing Electrical power UNIT 1
Standard Description
This electrical power unit is designed for your fork lift field, consisting of really productive gear pump, DC motor, manual increase and reduce valve, tank, ect. The up and down motion are managed from the lever of your guide release valve, that’s equipped with an electrical switch to activate the motor. The lowing velocity is managed by the pressure compensated movement management valve.
Particular Notes
one. The duty of this energy unit is S3, i.e. thirty seconds on and 270 senconds off.
two. Clean all the hydraulic elements concerned just before set up of the electrical power unit.
three. Viscosity from the hydraulic oil shoud be 15~46 cst, which need to also be clean and no cost of impurities, N46 hydraulic oil is suggested .
four. Oil modifying is required just after the initial 100 operation hours, afterwards as soon as just about every 3000 hrs.
five. The energy unit proven is intended to be mounted horizontally.
Materials Managing Power UNIT 2
General Description
This energy unit characteristics energy up gravity down circuit. Activate the start off solenoid to begin the motor to lift the machine. The lowing movement is activated from the solenoid valve with all the decreasing pace controlled through the stress compensated movement manage valve. Solutions of this series could be widely used in the sector of logistic gadgets which include fork lift, mini lift table, and so on.
Particular Notes
one. The duty of this electrical power unit is S3,i.e.,thirty seconds on and 270 senconds off.
two. Clean all of the hydraulic components concerned in advance of mounting the power unit.
3. Viscosity with the hydraulic oil shoud be 15~46 cst,which ought to also be clean and absolutely free of impurities, N46 hydraulic oil is suggested .
four. Oil transforming is needed soon after the preliminary a hundred operation hrs,afterwards once just about every 3000 hours.
5. The power unit needs to be mounted horizontally.