The tapered barrel on these bushings is split on both sides, allowing them to contract more tightly around the shaft than quick-disconnect and taper-lock bushings. They’re for make use of with split-tapered sprockets and pulleys of the same bushing design. As you tighten the included screws, the bushing grips the shaft and pulls it into the sprocket or pulley.
This Split Taper Bushing is designed exclusively for use with cast iron bushed bore pulleys and will be purchased on a single page as the pulley you need. For employ with 5/8” shaft sizes. Comes with set screws. Additional Features: Manufactured from Steel For work with with cast iron bushed bore pulley
Our stock metal Split Taper bushings feature wrench torque capability from 95 to 3,000 pounds and bore sizes from 3/8″ to 6-3/16″.
The split tapered bushing is a flanged bushing. Split tapered bushings are used on sheaves, pulleys, sprockets and gear belt pulleys. The split tapered bushing alleviates the necessity to have a component bored to size, preferably lowering on hand requirements and allowing for adjustments in shaft size if important. The barrel of the split tapered bushing is definitely split in two spots and can be keyed to the shaft. The barrel OD can be keyed to the travel component aswell. The advantage of the split tapered bushing is it will hold, whether or not the fasteners turn into loose. Split tapered bushings happen to be interchangeable between manufacturers.

Taper bushing are widely used together with sprockets, v-belt pulleys, timing pulleys, coupling and other mechanical parts with taper bore connections.
Taper bushing series are created from high quality engineered components with great tolerance. The characteristic is easy to use and needs no extra alteration. These bushings can go well with almost all types of assemblies and sizes. They will be the best choice in style for mechanical connections.
To complete designations add bore size. For example: PD1215X16MM designates a 1215 taper bushing with a 16mm bore.
No costly re-boring: complete range of both metric and imperial offered.
Standard range fits up to 125mm/5″ shafts & Hub diameter required will depend on the application.
Complete brief reach range available, for compact compact assemblies & Clean, Compact Style.
Simple installation and removal.
This Split Taper Bushing is designed exclusively for use with cast iron bushed bore pulleys and can be purchased on a single page as the pulley you need.
For use with 1 3/16” shaft sizes.
Comes with 2 set screws.

Additional Features:
Made of Steel
For use with cast iron bushed bore pulley
This U1 Bushing with 5-1/2″ bore is a high-quality precision product that is built for durability and strength. U1 bushings are used in an extensively wide range of applications, which includes; sprockets, shaves, pulleys, gears, and much more, we as well offer all of these products. What sets this bushing apart may be the high-quality steel building along with precise manufacturing and high quality control; this means that you always get a premium quality constant product. What really sets us in addition to the other men is our experienced expert workers and our company-wide goal of customer satisfaction.
1. Be certain the tapered cone surfaces of the bushing and the within of the driven product will be clean and free of anti-seize lubricants.
2. Place the bushing in sprocket or other part type that accepts the bushing.
3. Place cap screws loosely in pull-up holes. The bushing remains loose to assure sliding in shape on shaft.
4. With important on shaft, slide the sprocket or other portion type to the required posture on the shaft. Be sure to leave the heads of the cap screws available.
5. Align the sprocket or portion type, tighten the screws additionally and progressively until they happen to be pulled up tight. Do not use extensions on the wrench handles and don’t permit the sprocket or part to end up being drawn i contact with flange of bushing. At this stage there must be a gap between the bushing flange and sprocket, make certain this gap will not close.
Dual split barrel ensures concentricity
Grips the shaft with great clamp fit
High torque carrying capacity
Permits blind assembly
Load not carried or limited by mounting screws
External key on most sizes for positive drive and increased torque carrying capabilities
Split Taper Bushing china Double-split barrel for positive clamping
Solid flange to maintain concentric bores
Available in in ., metric, and spline bores. Bore range between 3/8″ to 10″
Solid Flange & Dual Split Barrel – Assures better concentricity to the shaft.
Key to Key Drive – With keys in both the shaft and product to supply the strongest possible drive.
3/4″ per Foot Taper on Barrel – Self locking taper supplies the highest degree of mechanical locking item to product.
The tapered barrel on these bushings is split on both sides, permitting them to contract more tightly around the shaft than quick-disconnect and taper-lock bushings. They’re for apply with split-tapered sprockets and pulleys of the same bushing style. As you tighten the included screws, the bushing grips the shaft and pulls it in to the sprocket or pulley.
This Split Taper Bushing is designed exclusively for use with cast iron bushed bore pulleys and can be purchased on a single page as the pulley you need. For use with 5/8” shaft sizes. Includes set screws. Additional Features: Manufactured from Steel For make use of with cast iron bushed bore pulley
Our stock steel Split Taper bushings feature wrench torque potential from 95 to 3,000 pounds and bore sizes from 3/8″ to 6-3/16″.
The split tapered bushing is a flanged bushing. Split tapered bushings are utilized on sheaves, pulleys, sprockets and equipment belt pulleys. The split tapered bushing alleviates the need to have an element bored to size, preferably lowering on hand requirements and enabling changes in shaft size if important. The barrel of the split tapered bushing is normally split in two places and is definitely keyed to the shaft. The barrel OD can be keyed to the drive component aswell. The advantage of the split tapered bushing is it will hold, whether or not the fasteners turn into loose. Split tapered bushings happen to be interchangeable between manufacturers.