one.A connecting link of an O-ring Chain for basic application is pre-coated with grease at the pins. Ahead of connection, confirm the grease around the surfaces of pins, and if the volume of grease is compact, apply grease with bare hands. (If gloves are utilized, the grease will be absorbed from the gloves.)
Example: When the connecting hyperlink (I) of an O-ring chain for basic application is
shipped, O-rings are fitted on the roots of the pins. If the O-rings come loose as a result of vibration for the duration of transport, refit the O-rings in on the roots of the pins.
In this instance, make sure you return the grease collected on the roots from the pins for the central surfaces with the pins, extra at portion A than at portions B proven inside the above illustration. (Portions A is worn due to sliding with the bushings.)
2.The chain can be most conveniently connected about the teeth of a sprocket. Engage the back links at both ends from the chain using the sprocket teeth and fit connecting pins. In case the sprocket may be moved, the chain may also be connected within the loosened side.
3. Connecting process
1.Confirm that O-rings are attached on the roots from the pins.
2.If the volume of grease applied to the connecting pins is small, coat the pins with grease in the central portions.
three.Insert the connecting pins into the bushings of your inner links at each ends.
4.Confirm that the grease is utilized for the total face with the O-ring, and match the O-ring onto the connecting pins.
five.Insert the connecting pins into the connecting plate and while pressing the connecting plate, install the spring clip. Verify irrespective of whether the head (the end without a split) of the spring clip is turned from the feeding course in the chain. (See the next illustration.)
6.You should definitely verify that the spring clip is securely fitted while in the clip grooves on the connecting pins.
This completes jointing on the connecting hyperlink. Note that grease within the surfaces of connecting pins and O-rings may be removed all through installation function. In this case, re-grease employing the grease about the surface in the base chain or even the grease within the polyethylene bag in which the connecting website link was contained.