Solitary reduction worm gearing offers high ratio reduction with couple of moving parts in a close-coupled compact drive. The right angle arrangement of driving-to-driven machine takes a the least space. Input and result shafts can be extended in either or both directions in horizontal or vertical plans adaptable to any installation requirement. Efficient electric motor speeds are reduced to slow speed requirements of several industrial machines in one reduction.
Product Features
Ratios 5:1 to 70:1
Hollow & Solid Output Shafts
Vertical & Horizontal Mounting
Fan Cooled (Standard)
Motor Mounts (C-Encounter Adapters or Scoops)
Cast Iron or Metal Housings
Products
The exclusive use of the involute Helicoid Thread form (with departing side contact) on the worm and gear offers high efficiencies, and long service lifestyle. The hardened surface and polished alloy steel worm develops a clean, work hardened surface area on the bronze gear. Because of this worm gears put on in and improve with prolonged service while additional gears are deteriorating. Ever-Power offers a wide collection of model configurations, sizes, ratios, and accessories from our standard products.
Fabricated Designs
If the application involves severe shock loads or feasible housing damage from external sources (as in steel mills or mobile equipment applications) Ever-Power can offer fabricated steel housings with up to a 48″ center distances. Fabricated housings provide maximum rigidity and strength that allows the transmission of higher horsepower amounts than are possible with standard cast iron devices. Extra heavy aspect plates connect the worm and gear shaft bearing facilitates, assuring appropriate meshing of the apparatus under all load circumstances. In smaller sized sizes, fabricated steel reducers are interchangeable with Ever-Power standard cast iron reducers.
Custom Designs
Ever-Power can provide custom rate and reversed engineered reducers for the application, be it a fresh project or a primary drop-in replacement for a competitor’s rate reducer. Fabricated steel reducers allow Ever-Power to match a competitor’s footprint, centerline, and shaft elevation allowing a primary drop-in replacement saving the client time and money.
Long – Quiet Life
All worm gears in Ever-Power reducers are produced from phosphorous bronze. Our style also incorporates a hardened, ground and polished alloy steel worm. This combination develops a simple, work-hardened mating surface area of the bronze equipment which boosts with prolonged service.
Worm gearing is a class of gear reducers that utilizes correct angle, nonintersecting shafts. This style of reducer provides easy and quiet procedure and allows for the possibility of large rate reductions. These gears can be found from share in a wide variety of ratios, from only 4:1 up to 3600:1. The compact design and structure allows worm gear reducers to be positioned in a relatively small space. Thus, high reductions in a limited package size can be achieved with this configuration. Our worm gear features the constant sliding tooth action between worm and one’s teeth. This increases the tolerance for weighty loads and shock loads. Worm gear drives provide users high reducing convenience of relatively low cost in comparison with some other types of gearing.
The utilization of worm gearing extends across many industries including food, beverage and grain and has many applications. Some applications that use worm gearing are: conveyors, mixers and bucket elevators.
Ever-Power worm equipment reducer gearbox series bottom on years of experiences uses designed teeth surface with unsurpassed torque transfer functionality with great functionality, efficency and cost.Worm gear program transmits power through sliding get in touch with, resulting in extremely low vibration , sound, little backlash and self-locking property
-Housing:One time we casting creats great rigidity for severe impacts. Outer cooling fins and internal lubrication oil diversion channel design to increase heat dissipation.
-Worm Shaft: Manufactured with Carbon alloyed Steel S45C or SCM415, precison machined and carburized to HRC45 or HRC60, after that for precision tooth grinding to ensure maximum contacting.
-Worm Wheel: Manufactured with Carbon alloy ALBC2, teeth are machined by precision CNC hobbing machine to sustain high impact.
A worm gear reducer is one kind of reduction gear package which includes a worm pinion input, an output worm equipment, and features a right angle result orientation. This kind of reduction gear package is generally used to have a rated motor acceleration and produce a low speed result with higher torque worth based on the reduction ratio. They often can solve space-saving problems because the worm equipment reducer is among the sleekest reduction gearboxes available because of the small diameter of its result gear.
worm gear reducerWorm gear reducers are also a popular type of swiftness reducer because they offer the greatest speed reduction in the smallest package. With a higher ratio of speed decrease and high torque output multiplier, it’s unsurprising that lots of power transmission systems utilize a worm gear reducer. Some of the most typical applications for worm gears can be found in tuning instruments, medical tests equipment, elevators, protection gates, and conveyor belts.
SW-1 and SW-5
Torque Transmission provides two sizes of worm equipment reducer, the SW-1 and the SW-5 and both are available in a variety of ratios. The SW-1 ratios include 3.5:1 to 60:1 and the SW-5 ratios include 5:1 to 100:1. Both of these options are produced with rugged compression-molded glass-fill up polyester housings for a long lasting, long lasting, light weight speed reducer that is also compact, non-corrosive, and nonmetallic.
Features
Our worm equipment reducers offer a choice of a good or hollow result shaft and show an adjustable mounting position. Both the SW-1 and the SW-5, however, can withstand shock loading much better than other reduction gearbox styles, making them well suited for demanding applications.
Rugged compression-molded glass-fill up polyester housing
Light-weight and compact
Non corrosive
Non metallic
Range of ratios
SW-1, 3.5:1 to 60:1
SW-5, 5:1 to 100:1
Grease Lubrication
Solid or Hollow output shaft
Adjustable mounting position
Worm Gear Reducers also called worm gearbox or worm velocity reducers. Worm equipment reducers are utilized for speed decrease and increasing the torque for electric powered engine drives. You can decide to mount your NEMA electric motor to the reducer utilizing the NEMA C encounter flange or use a coupling. If you want a coupling for the output or input shaft observe our coupling section for choosing the coupling. We offer four assemblies left hands and right hand and double result shaft and shaft input and shaft result. Interchangeable with many worm gear manufactures. Discover data sheet in item overview for diamensions. Unless you see your type, please Contact Us.
8 Ratios Available from 5:1 to 60:1
7 Gear Box Sizes from 1.33 to 3.25″
Universally Interchangeable Style for OEM Replacement
Double Bearings Used on Both Shaft Ends
Anti-Rust Primer Applied Inside and Outside Gearbox
Shaft Sleeve Protects All Shafts
S45C Carbon Steel Shafts
Flange Mount Versions for 56C and 145TC Motors
Ever-Power DDVM series triple-reduction worm gear acceleration reducers can be found in ratios from 5000:1 to 175,000:1 and center distances from 7” to 20” (larger sizes available on request). Output torque ranges from 33,000 in pounds. for the 7” CD DDVM-70 to 582,900 in pounds for the DDVM-200. Mechanical HP input requirements are from 0.09 HP for the 175,000:1 7 in CD reducer to 6.25 HP for the 5000:1 20” CD unit. These reducers are available in four configurations: horizontal, vertical, shafted, and shaft installed.
These reducers are ideal for water/waste-water tools drive applications such as thickeners and clarifiers, which require a vertical straight down shaft. Other available configurations also make Ever-Power triple reduction reducers perfect for use on mixers, elevators, solar panels, astronomical telescopes, indexing tables, hoists, conveyors, or various other process or components handling systems where huge torques/sluggish speeds are needed.
These reducers are also obtainable with a helical major reduction stage and so are termed the HDVM series
Product Features
Ratios 5000:1 to 175,000:1
HP from 0.09 to 6.25.
Output Torque to 583,000 in lbs.
Output RPM as low as 0.01 with a 1750 RPM input.
Ideal for ultra-slow speed, high torque applications
8 Ratios Available from 5:1 to 60:1
7 Gear Box Sizes from 1.33 to 3.25″
Universally Interchangeable Style for OEM Replacement
Double Bearings Used on Both Shaft Ends
Anti-Rust Primer Applied Outside and inside Gearbox
Shaft Sleeve Protects All Shafts
S45C Carbon Metal Shafts
Flange Mount Models for 56C and 145TC Motors
Description
The HDR Series worm equipment reducers are found in low to moderate horsepower applications to reduce speeds and increase torque. Worm gear reducers can be found in direct or indirect drive, direct drive versions are 56C or 145TC flange mount with either right, remaining or dual result shafts or a hollow bore output. The indirect drive versions are shaft input-shaft result boxes for use with sprocket or pulley drive systems. They offer an effective low priced solution to speed reduction and improved torque, with higher tolerances for shock loading than helical gear reducers.
In order to decide on a gearbox speed reducer, you will have to determine the required torque and provider factor for the application. Click on “Specifications” above for a table that will assist in identifying the service factor. For service elements above 1.0, multiply the required torque by the services factor.
Our regular 700 Series – the heart of Ever-Power quickness reducer product line – has been serving industry reliably for over 40 years. Its verified modular design has set the market standard for functionality and may be the most imitated product in today’s worm gear speed reducer market. But why accept a knock-off when you’re able to have the initial – from Ever-Power.
Specifications
11 basic single reduction sizes
8 basic double reduction sizes
1/6 – 25 HP
5:1 – 100:1 ratios single reduction
100:1 – 3600:1 ratios double reduction
Non-flanged, NEMA C-face quill, and coupled input styles
Projecting and hollow output shafts
Projecting diameters from 1/2″ to 2-1/4″
Hollow output bore diameters from 5/8″ to 3-7/16″ (with over 20 bore sizes in stock)
Product Features
The 700 Series’ huge oil reservoir provides efficient heat dissipation and lubrication for longer operating lifestyle.
Its multi-position mounting flexibility permits installation in practically any position.
Housings are straddle-milled, best and bottom, for precise alignment of horizontal and vertical bases.
Internal baffles assure positive, leak-free venting.
The 700 Series’ rugged housing, fabricated of fine-grained, gear-quality cast iron, provides maximum strength for maximum durability, along with greater precision during worm and gear alignment.
Ever-Power 700 Series high-strength bronze worm equipment is straddle mounted between heavy-duty tapered roller bearings to improve thrust and overhung load capacities, sizes 713-760.
Our 700 Series’ high-strength steel result shaft assures capacity for high torque and overhung loads.
Pipe plugs allow easy fill, level, and drain in virtually any mounting position.
The 700 Series’ super-finished oil-seal diameters on both input and output shafts extend seal life.
Both 2D and 3D CAD drawings are available in our eCatalog.
TheIncreased Quality! Industrial Ranked! Inexpensive!One-piece gearcase, without external ribs, is made of close-grained cast iron and provides for rigid equipment and bearing support. In addition, it offers excellent warmth dissipation.Dual lip, spring-loaded seals protect from oil leakage and prevent dirt from entering.Stepped shafts with oversized ball andtapered roller bearings.Carbon metal shafts for greater strength.High tensile strength cast bronze worm wheel and hardened and surface alloy steel worm made intregal with the shaft for long and trouble-free life.Essential oil sight gauge for ease of maintenance (not available on sizes 25 and 34).Factory oil stuffed.Every unit test run just before shipment.Universal mounting with bolt-on ft.Highly modifiable design.All of this at substantially decrease prices than you have already been accustomed to paying for reducers of lesser quality. Less